Rendura is a course textured medium that can be applied to most surfaces to achieve a variety of creative finishes. It’s versatility allows you to create the aged look of rustic stone, the modern look of concrete or even a soft natural sand-swept look.
Prepare surfaces ensuring they are free from dirt, grease and peeling paint/varnish. Apply Rendura with a brush / trowel / scraper over the prepared surface. Touch dry in 30 mins. Recoat after 2 hours if applicable. To achieve a variety of finishes, different applications can be carried out.
Before the Rendura is dry
NATURAL STONE LOOK – use a damp sponge in a circular motion to create layered depths of ‘pitting’.
CONCRETE LOOK – use a clean trowel to glide over the surface, followed by a damp sponge to smooth out.
SAND-SWEPT LOOK – use a wet brush over the surface in a random fashion to create smooth layers of texture.
After the Rendura is dry
Use 120 grit sandpaper to smooth and 180 grit sandpaper to polish. Paint can be applied to produce distinctive effects. Use a topcoat from our Finishes range to seal the Rendura.
Remove any excess Rendura from all tools and wash immediately in water. Do not pour any unused Rendura or washings down the drain.
Refer to your State or Territory Land Waste Management Authority. Most Authorities permit disposal at approved land waste sites.
Keep out of reach of children. Provide adequate ventilation. Wear suitable safety glasses and an appropriate protective mask when sanding.
If swallowed, do not induce vomiting. If eyes or skin become irritated wash with water. In both cases seek medical advice.